Hardware

Durable heavyweight construction specificallydesigned for rigging and rescue applications. Theseare no lightweight rock climbing ascenders! Easy tooperate with gloved hand, these ascenders comewith large thumb release on cam, large moldedhand grip and double clip-in points. Unique camdesign allows for increased strength. Will accommodate9 to 13 mm ropes. Strength (frame) 6000 lbf.

A new mobile fall arrester from Kong that follows the operator in both directions. With its unique locking cam configuration, the Back-Up supports fall factor 2 falls in a semi-dynamic way, without damage to the safety rope.• Stops a fall, slide or uncontrolled descent• Works on vertical or angled rope• Moves up or down along the rope without manual intervention• Easy to install and remove at any point on the rope• For rope access applications unit can be used with tug cordMeets ANSI Z359.1-2007 and OSHA requirements in North America.Certified to CE EN 353-2, EN 358, EN 567.Lazer marked ANSI Z359.1-2007.Technical specifications:10.0 to 12.0 mm semi-static ropes (EN 1891 type A) certified with the deviceComes with the Kong Steel Oval auto locking carabiner205g + carabiner (180g) 385g. totalIf used for fall protection, to meet ANSI and EN requirements, Back-Up can be used without a lanyard or in conjunction with a lanyard under 16 inches (Total length including carabiners). This length lanyard will limit maximum potential fall distance to less than 1 meter.

888 Kong Duck Ascender/ Rope GrabSuper small simple ascender for a multitude of lightweight,low profile uses. Great for super light fixedrope work. Will also work on slings! Accepts ropesfrom 8 to 13 mm and slings from 10 to 15 mm wide.Weight 70 grams.

Kong Futura Rope Handled AscenderInnovative lightweight handled ascender. Enablesrope ascending and hand line operation with asuper lightweight unit. Comes with two interchangeablehandles. Ascenders available right or left hand. Accepts ropes from 8 to 12 mm.Weight 125 grams ea.

Kong Futura Rope Handled AscenderInnovative lightweight handled ascender. Enablesrope ascending and hand line operation with asuper lightweight unit. Comes with two interchangeablehandles. Ascenders available right or left hand. Accepts ropes from 8 to 12 mm.Weight 125 grams ea.

Attaches to front of harness in chest area to help user maintain an upright position and serve as a progress capture. Yates Rope Access harness and RTR Tower Harness have attachment points already equipped to utilize the Croll’s excellent features.

Self braking device designed for descending rope and for belaying. Easily installed on the rope without disconnecting it from the harness. Anti-panic feature built in. When the user pulls too hard on the handle it causes the device to lock up. Easily releaseable after locking. Climbing is also possible with the addition of a rope grab and a foot stirrup or etrier. Can also be used effectively in haul systems. Great for rope access work. NFPA G.

Compact rope clamp/grab intended for moving on fixed ropes. Suitable for hauling heavy loads. Incorporated into a hauling system, it operates as a progress capture device. Acts as a load limiter if overloaded or subjected to an impact force.Available in all black.

Designed for rope access work (expert users only). Multi-function handle allows the user to unlock the rope and control the descent with the hand on thefree end of the rope and position themself while on the rope without tying off the device. The automatic return system on the handle limits risks in case of aninvoluntary action by the user. The safety gate on the moving side plate helps prevent dropping the device and facilitates installation of the rope and passing intermediate anchors. Can also be used for short ascents (RAD system). For rope between 10.5 and 11.5mm in diameter. Colors: Black ($155.00) or Gold.

This compact rack is fitted with 4 long-wear tubularstainless bars, two of which are tie-off bars. Thisrack design allows the user to vary the friction withoutadding or dropping bars or disconnecting fromthe system like traditional racks, whether it is beingused in a controlled, fast single person rappel or aheavy rescue lower. As more professional trainersbegin to expose their clients to the benefits of thisalternative style rack, it is clear they are growing inacceptance and popularity. Certified to NFPA 1983/2001 edition.

One of the most widely used descent and lowering devices available. It will accept single or double ropes of several diameters and yet provides a wide range of friction for descent control or lowering control. Allows the user to change the number of bars as necessary when in use with a load. Certified to NFPA 1983/2001 edition.• 1 inch diameter stainless steel tie off bar• 7/8 inch diameter blue anodized aluminum bar with training groove and straight slot